Combination Drill and Spot-facing Tools.

• Drill and spot face, in one operation!
• Highly recommended where spot facing must be perfectly aligned with drilled holes.
• Rigid tool holder and cutter heads encase nearly the entire drill for outstanding support.
• Positive stop screw in the shank provides drill length adjustment.
• Dual set-screws in the cutter head provide secure support and driving force.
• Robust cutter heads can be sharpened repeatedly and are easily replaced.
• Spot-Bits are available from 1/8" to 21/32" and 3mm to 16.5mm, and can counter-bore to approximately 1/8" deep.
• Spot-Bit cutter diameters can be altered to meet specific needs.