Spot-Bit PhotoSpot-Bit diagram
Burr-Bit logo

    Combination Drill and Spot-facing Tools.

  • Drill and spot face, in one operation!
  • Highly recommended where spot facing must be perfectly aligned with drilled holes.
  • Rigid tool holder and cutter heads encase nearly the entire drill for outstanding support.
  • Positive stop screw in the shank provides drill length adjustment.
  • Dual set-screws in the cutter head provide secure support and driving force.
  • Robust cutter heads can be sharpened repeatedly and are easily replaced.
  • Spot-Bits are available from 1/8" to 1/2" and 3mm to 13mm, and can spot-face to approximately 1/8" deep.
  • Spot-Bit cutter diameters can be altered to meet specific needs.